Home made PCB AND ASSEMBLE

                 Home made PCB AND ASSEMBLE
First step prepare the SCH and PCB files.
                                                              

Step 1: Step 2 of home made pcb

                                                                  

Prepare the copper PCB and the print the PCB layout

Step 2: Step 3 of home made pcb

                                                                    

Print the PCB layout on a glossy paper

Step 3: Step 4

                                                             

Clean the copper surface.

Step 4: Step 5

                                                          

Cover the copper surface with the printed glossy paper

Step 5: step 6

                                                    

Using an fully heated iron transfer the tonner to the copper surface. 

Step 6: step 7

                                                       

Immerse in hot water the PCB and clean the residual paper from the surface.

Step 7: Step 8

                                                                 

Immerse the PCB in ferric chloride.

Step 8: step 9

                                                             

Prepare the components and drill holes in the PCB for them.

Step 9: step 10

                                                             

Prepare the copper surface of the PCB for soldering.

Step 10: step 11

                                                             

Solder the components in to the PCB, cut the excess leads and make a final inspection before you power up the system!

DECLARATION:
OUR BLOG IS NOT FOR COMMERCIAL PURPOSE.ONLY FOR EDUCATIONAL PURPOSE.ALL CREDITS GOES TO BLOG AND RESPECTIVE AUTHOR.CLICK HERETO GO ORGINAL PAGE.